Image Liquid Rubber


Commercial


Commercial Roofing Applications Works on pitch and non-pitch roofs

Target Your Flat Roof or Metal Roof to Save Money

We specialize in the maintenance and repair of existing commercial flat roofs or Commercial metal roofs. Impressive advances in roof coating technologies give us the tools to reliably extend the life of your present roof without expensive tear offs and replacements. Your existing commercial roof is a source of cost savings over time for your business. Make your commercial roof pay; minimize costs with a program of timely inspections and timely maintenance. Liquid Rubber is a liquid EPDM product formulated specifically to coat roofs of Commercial Roofing Applications. Liquid EPDM rubbers have the best aging properties (retains flexibility longer) of all the elastomers. In addition to their lightweight, mechanically fastened assemblies are known for their economical advantages and quick installation, Liquid EPDM is formulated for residential and commercial buildings repair.

Commercial Roof Restoration That Won’t Break Your Maintenance Budget

The greater majority of commercial premises are constructed with metal roofs – comprised of clip lock trim deck or similar profiles. Naturally, your roof is exposed and susceptible to the elements resulting in expansion and contraction, acidity and weathering and ultimately to significant damage requiring the expertise of a company skilled in commercial roof repairing or restoration.
TECHNICAL INFORMATION/PHYSICAL PROPERTIES (CLICK HERE)

Metal

A one coat application of Liquid Rubber 9981 will produce a 20 mil(.5mm) dry film. No primer is need even if metal has tightly adhering corrosion. Rubber & Thermoplastic membranes Repair delaminated seams; resurface deteriorated flashing in place; stops embrittlement of Hypolon and PVC; recoat single ply EPDM.

Urethane Foam

One coat will protect foam against UV degradation.

Plywood

Liquid EPDM Can be applied direct to plywood and lumber.

Concrete

Rubber will penetrate into fissures at joints between old and new concrete. Product will also penetrate into surface pores unless concrete is trowel finished or pores are first sealed with a primer. Liquid Rubber will effectively waterproof tiles and rain gutters made of concrete or adobe type materials.

Flashing and repairs.

Roof to wall flashings can be formed in place by reinforcing the rubber with polyester fabric. No mechanical fasteners are needed. Quick repairs to reinforce weak areas or bridge cracks can also be made in similar fashion. Liquid EPDM roofing systems also feature low maintenance, easy repair options and low annualized costs.

Commercial and Industrial Applications.

Liquid EPDM is widely use for Commercial and Industrial Applications.

Steel Siding For Commercial Buildings.

Liquid EPDM rubber is an excellent recoat product for roll formed steel siding which is starting to corrode at the bends. The rubber can be applied as one coat system with no corrosion inhibitive primer needed. The useful life of metal roofs also benefits greatly when Liquid EPDM Roof is applied. Over 70% of all commercial roofing installations involve the re-roofing of an existing building rather than the installation of a roof on a new building. Liquid EPDM Rubber is also a very effective coating for steel repairing especially where it is exposed to salt environment.

Fabricated steel in marine environments.

Cranes , tanks and support structures at dock facilities experience accelerated corrosion rates due to salt water exposure. Liquid EPDM rubber coatings are not affected by salt and are ideal for this type of environment.

Steel storage tank.

Elevated or on ground steel storage tank can be effectively protected with a Liquid rubber coating. Surface condensation, cathodic protection nor thermal stresses between sun and shady areas present problems for the coating.

Concrete pipe and spill containments.

(Product-XP 847) Liquid EPDM rubber coatings are very effective for protecting concrete pipe against salt water corrosion. They can tolerate higher temperatures, exposure to strong sun, and have 2.5 times higher solids than liquid Neoprene coatings.

Corrosive environments.

Corrosive environments are created by many Commercial operations where acids are used. Similar conditions can also be produced organically in poultry and hog production operations which generate high volumes of manure. In a commercial environment protection is very necessary. Liquid EPDM coatings can protect the steel and other construction materials from rapid deterioration in these environments.

One component Thermoset EPDM Coatings

Non thermoplastic materials, regardless of shape can now be coated with Liquid EPDM rubber as a protection against corrosion or chemical attack. The coating can be applied by spray, dip or flowcoat methods and than cured in an oven at temperatures from 250-300 F (120-150 C). These single component products are custom formulated for a specific application, have good storage stability and are very easy to apply. Viscosity and solids content can be controlled and make it possible to apply thin as well as thick coatings of Liquid EPDM rubber.









  • Testimonials

    • Rick M.

      The epdm rubber roof was easy to work with. I am very pleased after having a leaky roof that will be good for many years to come. Roof had mold on it so we first killed the mold with Clorox and water and scrubbed I down and then cleaned the roof with Dawn dish detergent. Attached are the before and after pictures. ThanksRick M.

    • Staff at EPDM Coatings,

      My 29, RV had a couple leaks, at the front where the aluminum and rubber roof came together under a molding, and under the radio antenna. I purchased the 5 gallon bucket. I mixed as directed, then poured mixed product into another clean bucket, scraped it clean, and mixed a few more minutes. After preparation, I applied the liquid rubber around all edges and roof fixtures, I poured small amounts out of the bucket onto the roof and distributed with squeegee or roller as needed, until product was gone and… Read more

    • Hello,

      My name is Jeremy Berkheimer and I purchased the liquid roof coating earlier this spring. I am attaching the before and after photos of my 38 sandpiper roof. This coating was awesome. It took some real cleaning before hand and a I got a bit of extra exercise spreading it but the finished product seems well worth it. Thanks!

    • Hi

      Please find attached before and after photos for my camper roof. I forgot to snap a pic of the before, so I had already started applying the Proflex primer when I took the picture. You can still see the condition of the roof though! Also, the after pic was after the newly coated roof endured it’s first rainfall.

    • Paul

      Hi Everyone, I completed my project and it was much easier than I thought, I wish I had done this years ago, and glad I chose this coating versus the other offerings out there. I will send you 2 more emails, this is the start of cleaning, next is primer, the third is the coating. Hope they are worth of a gift card. Thanks

  • Contact

    EPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Call: 610-298-1989, Fax: 702-977-2936
    Proud Distributor of Proguard Coatings
    Tel: 1-610-298-1989
    Email: info@epdmcoatings.com
Full Stocking Distributor of Proguard Coatings
Authorized Stocking Distributor of Proguard Coatings
Copyright © 2017 Buy Liquid Roof