Doug B Nahant, Ma

Posted on: March 22nd, 2013 by Kellie

My 1998 Overland Lorado motor home has an EPDM roof that is showing its age.

Chalking and small cracks are evident and the roof has had numerous repairs by the previous three owners. I researched roof coatings on the internet and concluded that Liquid Roof was the best product for restoring the roof.

I live in Boston and have trees overhanging my driveway so I decided to apply the Liquid Roof while in Tucson Arizona while staying in a RV resort.

I ordered 8 gallons on Monday and it arrived on Friday, much faster than I expected. I bought the tools at local stores (paint brushes, roller, squeegee, wire brush and cleaning supplies). I found the Instructions and You Tube videos helpful in planning the project. Preparing the roof took about 10 hours (cleaning, brushing, patching with butyl tape and taping edges). Applying Liquid Roof took about 6 hours and most of the time in the mixing and painting the edges using a brush. I found a hand held 12 squeegee worked well in the tights areas of a motor home roof. This was a one man job and can be done by someone with moderate home handyman skills. The roof looks great and I expecting many years of added life with no leaks.

Thanks for your help.

before_liquidroof_01_1

after_liquidroof_01_2



  • Testimonials

    • Rick M.

      The epdm rubber roof was easy to work with. I am very pleased after having a leaky roof that will be good for many years to come. Roof had mold on it so we first killed the mold with Clorox and water and scrubbed I down and then cleaned the roof with Dawn dish detergent. Attached are the before and after pictures. ThanksRick M.

    • Staff at EPDM Coatings,

      My 29, RV had a couple leaks, at the front where the aluminum and rubber roof came together under a molding, and under the radio antenna. I purchased the 5 gallon bucket. I mixed as directed, then poured mixed product into another clean bucket, scraped it clean, and mixed a few more minutes. After preparation, I applied the liquid rubber around all edges and roof fixtures, I poured small amounts out of the bucket onto the roof and distributed with squeegee or roller as needed, until product was gone and… Read more

    • Hello,

      My name is Jeremy Berkheimer and I purchased the liquid roof coating earlier this spring. I am attaching the before and after photos of my 38 sandpiper roof. This coating was awesome. It took some real cleaning before hand and a I got a bit of extra exercise spreading it but the finished product seems well worth it. Thanks!

    • Hi

      Please find attached before and after photos for my camper roof. I forgot to snap a pic of the before, so I had already started applying the Proflex primer when I took the picture. You can still see the condition of the roof though! Also, the after pic was after the newly coated roof endured it’s first rainfall.

    • Paul

      Hi Everyone, I completed my project and it was much easier than I thought, I wish I had done this years ago, and glad I chose this coating versus the other offerings out there. I will send you 2 more emails, this is the start of cleaning, next is primer, the third is the coating. Hope they are worth of a gift card. Thanks

  • Contact

    EPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Call: 610-298-1989, Fax: 702-977-2936
    Proud Distributor of Proguard Coatings
    Tel: 1-610-298-1989
    Email: info@epdmcoatings.com
Full Stocking Distributor of Proguard Coatings
Authorized Stocking Distributor of Proguard Coatings
Copyright © 2017 Buy Liquid Roof