Elmer Yoder

Posted on: March 25th, 2013 by Kellie

Dear Mr.Phillipine,

Thanks for the info on maintaining the EPDM roof on my motor home. The original roof was 18 years old. It was not leaking but was getting thin and needed something to restore the integrity of the original roof. Great care was taken to prepare the roof for application of the liquid EPDM. It was applied with a brush and roller. It took about 2 hours to apply the EPDM. This was done in September 2010. I checked the roof today ( June 20th 2011) and it looks as though the EPDM was just applied 5 days ago. I wish that I had taken pictures before starting the project and then after finishing. Thanks for a great product and for the info on maintenance.



  • Testimonials

    • Mike H.

      My roof was in bad shape. I cleaned it and kept after it a few times a year. We bought the RV used, and there were signs of neglect when we bought it. It had been obviously sitting in the sun for an extended period of time without any care or maintenance. I was about to buy a sheet of EPDM and forego the labor intensive and very expensive task of replacing the sheet roof. Then I saw a video on Youtube for Liquid EPDM. So the research began. “This… Read more

    • Tom Pituch

      I was able to quickly find the 2 pictures I took after I patched the roof. I will continue to look for the before pictures, We have a flat roof with a channel down the middle that leads into a drain pipe system that has been our weak point area all along. Then we installed a sky light which was like adding gasoline to a fire. For years I was blaming the sky light that we installed. We even replaced portions of the sky light and sealed around it many… Read more

    • Bob & Sally H.

      The two pictures are the before and then after using your product Liquid Rubber. Very pleased with the way it turned out! And also the shipping sure came quickly. Have a great and safe day! Bob & Sally H.Yuma AZ

    • Rick M.

      The epdm rubber roof was easy to work with. I am very pleased after having a leaky roof that will be good for many years to come. Roof had mold on it so we first killed the mold with Clorox and water and scrubbed I down and then cleaned the roof with Dawn dish detergent. Attached are the before and after pictures. ThanksRick M.

    • Staff at EPDM Coatings,

      My 29, RV had a couple leaks, at the front where the aluminum and rubber roof came together under a molding, and under the radio antenna. I purchased the 5 gallon bucket. I mixed as directed, then poured mixed product into another clean bucket, scraped it clean, and mixed a few more minutes. After preparation, I applied the liquid rubber around all edges and roof fixtures, I poured small amounts out of the bucket onto the roof and distributed with squeegee or roller as needed, until product was gone and… Read more

  • Contact

    EPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Call: 610-298-1989, Fax: 702-977-2936
    Proud Distributor of Proguard Coatings
    Tel: 1-610-298-1989
    Email: [email protected]
Full Stocking Distributor of Proguard Coatings
Copyright © 2019 Buy Liquid Roof