G. Sorrell (Lufkin, TX)

Posted on: March 25th, 2013 by Kellie

Everyone was SUPER helpful and knew the product, properties and application methods well. I applied to product on the trailer in about a 2-hour period one evening. It was tricky with the application, from a novice who had not done this before, on the flat surface as well as rounding the corners and down on the sides about 6 inches. It went GREAT! Needless to say, I am super proud of the product and the finished job. I cannot thank your folks enough for the support and quality of the product. Excellent. Coming from a process management philosophy and background, it leads me to be extra thankful for outstanding processes with outstanding people. Thanks again,

Here is what I say about my finished product now…. “No drips, no runs, no errors!”

G. Sorrell (Lufkin, TX)
Diboll Lumber Operations



  • Testimonials

    • Mike H.

      My roof was in bad shape. I cleaned it and kept after it a few times a year. We bought the RV used, and there were signs of neglect when we bought it. It had been obviously sitting in the sun for an extended period of time without any care or maintenance. I was about to buy a sheet of EPDM and forego the labor intensive and very expensive task of replacing the sheet roof. Then I saw a video on Youtube for Liquid EPDM. So the research began. “This… Read more

    • Tom Pituch

      I was able to quickly find the 2 pictures I took after I patched the roof. I will continue to look for the before pictures, We have a flat roof with a channel down the middle that leads into a drain pipe system that has been our weak point area all along. Then we installed a sky light which was like adding gasoline to a fire. For years I was blaming the sky light that we installed. We even replaced portions of the sky light and sealed around it many… Read more

    • Bob & Sally H.

      The two pictures are the before and then after using your product Liquid Rubber. Very pleased with the way it turned out! And also the shipping sure came quickly. Have a great and safe day! Bob & Sally H.Yuma AZ

    • Rick M.

      The epdm rubber roof was easy to work with. I am very pleased after having a leaky roof that will be good for many years to come. Roof had mold on it so we first killed the mold with Clorox and water and scrubbed I down and then cleaned the roof with Dawn dish detergent. Attached are the before and after pictures. ThanksRick M.

    • Staff at EPDM Coatings,

      My 29, RV had a couple leaks, at the front where the aluminum and rubber roof came together under a molding, and under the radio antenna. I purchased the 5 gallon bucket. I mixed as directed, then poured mixed product into another clean bucket, scraped it clean, and mixed a few more minutes. After preparation, I applied the liquid rubber around all edges and roof fixtures, I poured small amounts out of the bucket onto the roof and distributed with squeegee or roller as needed, until product was gone and… Read more

  • Contact

    EPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Call: 610-298-1989, Fax: 702-977-2936
    Proud Distributor of Proguard Coatings
    Tel: 1-610-298-1989
    Email: [email protected]
Full Stocking Distributor of Proguard Coatings
Copyright © 2019 Buy Liquid Roof