Glenn L. A

Posted on: January 14th, 2016 by Kellie

I ordered the RV Liquid Roof to cover the roof on my 28-foot Class C motorhome. I was not the first owner, the previous owner had done some repairs to the roof but the old sealant used was failing and the roof was starting to leak. I took advantage of a nicer day this winter and cleaned and coated the roof.

Applying it was really easy, I would pour some on the roof, then use a roller to move the coating by building a “wave” ahead of the roller to push the coating into the places I wanted “a little extra” coating, then rolled the rest out from that. To get the edges, I simply rolled the coating to the edge and “just over” onto the edge of the rain cap. A couple of hours of work, and I was done.

What a difference!
Its been cooler here but one thing I have noticed in addition to no leaks from the roof – our furnace is not running as often! Previously it would turn on 3-4 times per hour, now it turns on 2-3 times per hour. Not a huge change but it helps our propane last longer! I would not say that this is a miracle coating, but it comes close!

Thanks!

rv-roof-before-14-jan-2016rv-roof-after-14-jan-2016

Glenn L. A
Coyote, CA



  • Testimonials

    • Rick M.

      The epdm rubber roof was easy to work with. I am very pleased after having a leaky roof that will be good for many years to come. Roof had mold on it so we first killed the mold with Clorox and water and scrubbed I down and then cleaned the roof with Dawn dish detergent. Attached are the before and after pictures. ThanksRick M.

    • Staff at EPDM Coatings,

      My 29, RV had a couple leaks, at the front where the aluminum and rubber roof came together under a molding, and under the radio antenna. I purchased the 5 gallon bucket. I mixed as directed, then poured mixed product into another clean bucket, scraped it clean, and mixed a few more minutes. After preparation, I applied the liquid rubber around all edges and roof fixtures, I poured small amounts out of the bucket onto the roof and distributed with squeegee or roller as needed, until product was gone and… Read more

    • Hello,

      My name is Jeremy Berkheimer and I purchased the liquid roof coating earlier this spring. I am attaching the before and after photos of my 38 sandpiper roof. This coating was awesome. It took some real cleaning before hand and a I got a bit of extra exercise spreading it but the finished product seems well worth it. Thanks!

    • Hi

      Please find attached before and after photos for my camper roof. I forgot to snap a pic of the before, so I had already started applying the Proflex primer when I took the picture. You can still see the condition of the roof though! Also, the after pic was after the newly coated roof endured it’s first rainfall.

    • Paul

      Hi Everyone, I completed my project and it was much easier than I thought, I wish I had done this years ago, and glad I chose this coating versus the other offerings out there. I will send you 2 more emails, this is the start of cleaning, next is primer, the third is the coating. Hope they are worth of a gift card. Thanks

  • Contact

    EPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Call: 610-298-1989, Fax: 702-977-2936
    Proud Distributor of Proguard Coatings
    Tel: 1-610-298-1989
    Email: info@epdmcoatings.com
Full Stocking Distributor of Proguard Coatings
Authorized Stocking Distributor of Proguard Coatings
Copyright © 2017 Buy Liquid Roof