Stephen L

Posted on: October 1st, 2013 by Kellie

Hi Kellie,

I spoke with Craig about my new roof. He told me to send you these pictures to receive a gift card.

My RV is a 1989 Georgie Boy Cruise Master. The roof was supposedly repaired when I bought it. However the repairman did not do a good job as the roof started lifting up while going down the interstate. After repairing the weak areas the leaks started. The entire front half of the ceiling was destroyed. Last summer I removed all the cabinets, and ceiling, then replaced it along with new insulation and roof trusses. I sealed the entire roof with some elastomeric, a competitors inferior product. I did not know about EPDM Rubber roof and was not told about it by three different RV dealers that I contacted to determine what was the best product to seal the roof. Well the leaks never stopped. Finally I used window screen and lap seal on all seams and around the edges of the entire roof to stop them from separating. This worked very well. Then I found the epdmcoatings.com web site. I have to admit that I was skeptical after everything else I had tried. However I am simply ecstatic and elated with the results. EPDM is actually thicker and more elastic than a new rubber roof membrane. And it goes on so easily. After the cleaning and prep work, the application was almost to easy. I am a full time RVer since 2002. I know and meet multitudes of RV owners and will definitely tell them about the product. I just do not think I could be any more pleased.

Thank you EPDM Coatings

Stephen L
Pensacola, FL 32534
850-774-6108

Liquid Roof Repair


  • Testimonials

    • Rick M.

      The epdm rubber roof was easy to work with. I am very pleased after having a leaky roof that will be good for many years to come. Roof had mold on it so we first killed the mold with Clorox and water and scrubbed I down and then cleaned the roof with Dawn dish detergent. Attached are the before and after pictures. ThanksRick M.

    • Staff at EPDM Coatings,

      My 29, RV had a couple leaks, at the front where the aluminum and rubber roof came together under a molding, and under the radio antenna. I purchased the 5 gallon bucket. I mixed as directed, then poured mixed product into another clean bucket, scraped it clean, and mixed a few more minutes. After preparation, I applied the liquid rubber around all edges and roof fixtures, I poured small amounts out of the bucket onto the roof and distributed with squeegee or roller as needed, until product was gone and… Read more

    • Hello,

      My name is Jeremy Berkheimer and I purchased the liquid roof coating earlier this spring. I am attaching the before and after photos of my 38 sandpiper roof. This coating was awesome. It took some real cleaning before hand and a I got a bit of extra exercise spreading it but the finished product seems well worth it. Thanks!

    • Hi

      Please find attached before and after photos for my camper roof. I forgot to snap a pic of the before, so I had already started applying the Proflex primer when I took the picture. You can still see the condition of the roof though! Also, the after pic was after the newly coated roof endured it’s first rainfall.

    • Paul

      Hi Everyone, I completed my project and it was much easier than I thought, I wish I had done this years ago, and glad I chose this coating versus the other offerings out there. I will send you 2 more emails, this is the start of cleaning, next is primer, the third is the coating. Hope they are worth of a gift card. Thanks

  • Contact

    EPDM Coatings N.E Sales Office
    494 Bridgeport Ave Suite 101,
    PMB 342 Shelton CT 06484-4748
    Call: 610-298-1989, Fax: 702-977-2936
    Proud Distributor of Proguard Coatings
    Tel: 1-610-298-1989
    Email: info@epdmcoatings.com
Full Stocking Distributor of Proguard Coatings
Authorized Stocking Distributor of Proguard Coatings
Copyright © 2017 Buy Liquid Roof